Hi-Tek Supercoat Powder


The Hi-Tek Supercoat is the same product as we are using on our coated bullets.
This coating is built with the latest generation resins and the 2-extreme catalyst is integrated. To use it, it is sufficient to measure the appropriate amount of powder and add acetone or M.E.K. (3.5 ounces of powder represents up to 16 fluid ounces of bullet coating).
Complete instructions are included.



The “Hi-Tek Supercoat” powder is manufactured by J & M Specialized Products P / L in Australia. This technology has been tested and used for more than 20 years. The “Hi-Tek Supercoat” bullet coating fully encapsulates the projectiles and replaces the standard lubricant.

Ammunition with a “Hi-Tek Supercoat” coating produces higher speeds, won’t jam your dies and can be used indoor without any problems. The coating does not release any toxic gases or particulates during the firing process. The coating is absolutely non-abrasive and contains no PTFE or MOLY. The end result prolongs your barrel and leaves you with a cleaner gun.

Weight 1 lbs
Dimensions 3 × 3 × 3 in

Gold 1035, Gunmetal, Zombi Green


16 oz, 4 oz, 8 oz